Kirk Key Interlock Company
INDEX
INTERLOCKS
Brass InterlocksHybrid Series Interlocks
316 Stainless Steel Interlocks
DOWNLOADS
Data Sheets
DrawingsAPPLICATION INFOCOMMON SCHEMESDUPLICATE KEYSKey Release FormCORPORATEORDERCONTACT

Email Kirk Key:
sales@kirkkey.com

 

 

  

316 Series Stainless Steel Type T Interlock -

The type T interlock is an assembly of two or more lock cylinders in a single housing. Type T interlocks are designed to retain one or more keys (called held keys) while the remaining (initiating) key(s) are removed.

Kirk Key Type F Interlock


This allows an exchange of keys in an interlock sequence. All initiating keys must be inserted into the type T interlock before the held keys can be removed. Once a held key is removed, the initiating keys are trapped in the interlock.

Type T interlocks are transfer blocks since there is no lock bolt projecting through the base for locking any moving part.

All components of the 316 Series type T interlock are made from electropolished 316 stainless steel.

Often the need for a type T interlock can be eliminated by using multi-cylinder interlocks mounted on other devices, making it unnecessary to go through an additional transfer lock operation.


OPTIONS:
• Key Removable - specify which key(s) are initiating (E) and which key(s) are held (W).
• Multi-Cylinder - up to 3 cylinders available. Please specify E or W key removable position for each cylinder.
• Stamp Key Interchange - specify an alphanumeric code to be stamped on the cylinder face and the key (e.g. A1, A2, B1, etc.). See Data Sheets 8.3 and 9.1 for details.
• Dust Covers - See Data Sheet 8.1 for details.
• Mounting Bolts - See Data Sheet 8.2 for details.

Note: When there are a large number of keys in the transfer step we recommend using a transfer panel instead of a type T transfer block. See Data Sheet 7.1 for details.

  
   

Copyright © 2000-2007 Kirk Key Interlock. All Rights Reserved.
Terms and Conditions
Web Site, Graphics & Design by R.S.Venables