Kirk Key Interlock Company
INDEX
INTERLOCKS
Brass InterlocksHybrid Series Interlocks
316 Stainless Steel Interlocks
DOWNLOADS
Data Sheets
DrawingsAPPLICATION INFOCOMMON SCHEMESDUPLICATE KEYSKey Release FormCORPORATEORDERCONTACT

Email Kirk Key:
sales@kirkkey.com

 

 

  

316 Series Stainless Steel Type TPS Interlock -

The type TPS interlock is a key actuated switch utilizing two tandem mounted Sq D Class 9001 KA1 contact blocks and is designed for back panel mounting (sub panel). The TPS can be installed so the lock cylinder will protrude 5/8" or flush mounted (by use of spacers).
Kirk Key Type F Interlock



The TPS has 2 N.O. & 2 N.C contacts. The contact blocks are U/L listed. Additional contacts are available, see options below.

The switch ratings are:

120VAC
60A make / 6A break / 10A continuous

240VAC
30A make / 3A break / 10A continuous

125VDC
0.55A make & break / 2.5A continuous

The lock cylinder and key are made from electropolished 316 stainless steel. The body of the interlock is brass and the mounting plate is made from aluminum.

OPTIONS:
• Contacts - 4 N.O. and 4 N.C. (Type TPSS if TPSS is ordered, a second set of contact blocks will be stacked on top of the first set of contact blocks).
• Multi-Cylinder - up to 2 cylinders available. Please specify E or W key removable position for each cylinder.
• Stamp Key Interchange - specify an alphanumeric code to be stamped on the cylinder face and the key (e.g. A1, A2, B1, etc.). See Data Sheets 8.3 and 9.1 for details.
• Multi-Cylinder - up to 2 cylinders available (M2TPS). The M2TPS is available with both keys removable at the same time or 1 key in and 1 key out (key exchange). Please specify at the time of order.
• Dust Covers - See Data Sheet 8.1 for details.
• Mounting Bolts - See Data Sheet 8.2 for details.

  
   

Copyright © 2000-2007 Kirk Key Interlock. All Rights Reserved.
Terms and Conditions
Web Site, Graphics & Design by R.S.Venables