Kirk Key: Hybrid Type F Interlock

Hybrid Type F Interlock -

The hybrid type F interlock is generally flat or face mounted with bolts through the front of the housing. Many breaker, switch and T/R manufacturers offer provisions for mounting type F interlocks.

The interlock housing is made from brass. The key, lock bolt and all internal parts are constructed from 316 stainless steel. The lock bolt is 5/8" diameter and the throw, or travel, of the lock bolt is ¾". Lock bolt movement is completely controlled by the rotation of the key (or keys in a multi-cylinder interlock).

OPTIONS
• Lock Bolt Length - when ordering, specify the length of the locking bolt in the withdrawn position. Standard lengths are 0", 1/4", 3/8", 1/2", 3/4", 1", 2" and 3". Non-standard lengths are also available.
• Key Removable - the key(s) is removable when the locking bolt is either in the extended (E) or withdrawn (W) position. Please choose E or W when ordering an interlock. NOTE: Key removable E is the most common because the locking bolt is typically extended to block/engage something.
• Multi-Cylinder - up to 3 cylinders available. Please specify E or W key removable position for each cylinder.
• Stamp Key Interchange - specify an alphanumeric code to be stamped on the cylinder face and the key (e.g. A1, A2, B1, etc.). See Data Sheets 11.1, 11.3 and 12.1 for details.
• Dust Covers - See Data Sheet 11.1 for details.
• Mounting Bolts - See Data Sheet 11.2 for details.

For Hybrid Type F Interlock Specification Data Sheet Click Here
For Hybrid Type F Interlock Drawings Click Here

Or choose from any of the following interlocks by type:

Hybrid Series Type F Interlock
Hybrid Series Type B Interlock
Hybrid Series Type D Interlock
Hybrid Series Type DM Interlock

Hybrid Series Type T Interlock
Hybrid Series Type TPS Interlock
Hybrid Series Transfer Panel