Instead of utilizing a terminal block, the SKPM is arranged so that the customer's leads are wired directly to the solenoid and to the auxiliary switch. The SKPM can be installed with the lock cylinder protruding 5/8” or flush mounted (by use of spacers provided). The SKPM is designed so that the key is removable only when the solenoid is energized. The optional signal lamp and push button kits are shipped loose for field wiring by the installing technician.

The auxiliary switch is UL listed. Each SKPM is furnished with two tandem mounted auxiliary switches and a total of 2 N.O. & 2 N.C. auxiliary contacts. The switch rating is:

- 120VAC -
60A make / 6A break / 10A continuous
- 240VAC -
30A make / 3A break / 10A continuous

The SKPM is typically used in combination with other Kirk Key interlocks. The SKPM is not offered with any type of housing. See Data Sheet 2.1 for the SKRU if a housing is required.

OPTIONS:
• Voltage 110VAC, 24VDC, or 125VDC.
• Signal Lamp A signal lamp kit is available to be wired by the installer.
• Push Button A push button kit is available to be wired by the installer.
• Stamp Key Interchange specify an alphanumeric code to be stamped on the cylinder face and the key (e.g. A1, A2, B1, etc.). See Data Sheet 3.4 for details.
• Mounting Bolts ¼”-20 x 5/8” hex head made of stainless steel with the option to drill the head for sealing wire. Tamperproof mounting bolts are also available (1/4”-20 x 3/4”). • Dust Covers See Data Sheet 3.1 for details.

For SKPM Specification Data Sheet Click Here
For SKPM Drawing Click Here
For Ordering Guide Click Here
For Solenoid Power Ratings Click Here

SKPM Wiring Diagram