Primary uses:
Disconnect switches in control circuits.
Indicate key/lock status to SCADA and other monitoring systems.

The Type S auxiliary switches can be mounted on the following interlocks:
Type F, Type B, Type D and Type T.

See Table 1 below for current ratings.

To order the S Switch option, put the number "3" in column four of the interlock part number. The number "4" = SS, "5" = SSS, "6" = SSSS. Reference the Interlock Ordering Guide and Table 2 below.

The switch is normally mounted with the cover on the same side as the lock cylinder. If necessary, the switch can be mounted so that the switch cover is facing the backwards (or "Reversed"), allowing access to the switch for an interlock that is mounted on the back of a panel, for example. To order the "Reverse Switch Housing" option, put the letter "R" in column fifteen of the part number. Reference the Interlock Ordering Guide. Unless specified, the switch housing will be mounted in the normal arrangement.

Note: Auxiliary switches cannot be field installed on existing Kirk Interlocks.

For S Switch Specification Data Sheet Click Here
For S Switch Drawings Click Here