Adapter plates are used to accomodate certain interlock mounting configurations.  See individual specifications below for more details.

trapped key interlocks

SHORT D PLATE

trapped key interlocks

LONG D PLATE

trapped key interlocks

FN PLATE

The Short D Plate is fastened to the back of a single cylinder Type D interlock to allow front mounting. The Short D plate is 3/8” thick and is available in brass for SD series interlocks, and stainless steel for HD interlocks

 

 

For further technical information please refer to the datasheet. 

 

The Long D Plate is made of brass and fastened to the back of a multi-cylinder SD Series Type D interlock to allow front mounting. The Short D plate is 3/8” thick and is available in brass for SD series interlocks, and stainless steel for HD interlocks.

 

For further technical information please refer to the datasheet. 

The FN Plate is made of brass and fastened to the end of a SD Series Type FN interlock to allow alternative mounting scenarios. The thickness of the FN Plate is 1/4” and is available in brass for SD series interlocks, and stainless steel for HD interlocks.

  

For further technical information please refer to the datasheet. 

 
 

The DM4 mounting plate can be welded to a door or a door frame to enable mounting of a DM interlock. The mounting plate is available in 1018 steel or 304 stainless steel.

  

For further technical information please refer to the datasheet. 

DM4 PLATE

trapped key interlocks

The DM2 adapter plate is designed to allow easy replacement of Type DY2 interlocks with Type DM interlocks.

  

For further technical information please refer to the datasheet. 

DM2 PLATE

trapped key interlocks
 
 

Adapter plates

Global Headquarters | 9048 Meridian Circle NW | North Canton, OH 44720 | USA  

                       (800)438-2442 | FAX (330)497-4400 | sales@kirkkey.com

Halma

© 2019 - ​Copyright Kirk Key Interlock Company. All rights reserved.